Construction Options

• - Standard Construction: Steel panels and structural elements are constructed of heavy-gauge hot-dip galvanized steel.
• - Optional Stainless Steel Construction: A variety of Stainless Steel options are available to meet your needs.
• 

Fan Drive System

The fan drive system provides the cooling air necessary to reject unwanted heat from the system to the atmosphere. Dynamically balanced, forwardly curved, centrifugal fans driven by matched V-belts with taper lock sheaves designed for not less than 150% of the motor nameplate horsepower are standard on the Series V.

- High Solidity Axial Fans

Adding a high solidity fan decreases sound levels by decreasing fan speed, which proportionally decreases sound levels. BAC offers three fan options for reduced sound pressure levels.

a. Standard Fan

b. Low Sound Fan

c. Whisper Quiet Fan

• - BALTIGUARD™ Fan System

• The BALTIGUARD™ Fan System consists of two standard single-speed fan motors and drive assemblies. One drive assembly is sized for full speed and load, and the other is sized for approximately 2/3 speed and consumes only 1/3 the design horsepower. This configuration allows the reserve capacity of a standby motor in the event of failure. As a minimum, approximately 70% capacity will be available from the low horsepower motor, even on a design wet-bulb day. Controls and wiring are the same as those required for a two-speed, two-winding motor. On some units the standby fan motor can be increased to the size of the main motor for 100% redundancy.

• 
• Low Sound Alternatives
• The low sound levels generated by Series V Cooling Towers make them suitable for most installations. For situations when one direction is particularly sound-sensitive, the unit can be oriented so that the side opposite the air inlet faces the sound-sensitive direction. The Series V is also available with factory designed, tested, and rated sound attenuation for both the air intake and discharge.